Welcome to the third and final part of our Johnny Bucket assembly series! In this post, we will be focusing on the crucial steps of wiring up the electrical components and joystick of the Johnny Bucket. These steps are essential for the proper functioning of the Johnny Bucket and will ensure that you are able to use it efficiently to tackle any outdoor project. So let’s dive in and get started!
Johnny Bucket Assembly Part 3: Wiring up the electrical and joystick
Introduction
Welcome to the third part of the Johnny Bucket Assembly guide. Johnny Bucket and Johnny Plow can turn any riding mower into a tractor. They can be purchased at johnnyproducts.com. In the previous two parts, we discussed the steps for installing the Johnny Products, and today we’ll talk about the final installation stage – the electrical hookup.
Installation Steps
Here are the steps for Wiring up the Electrical and Joystick:
-
First, remove the protective covering of the Johnny Bucket’s harness and connect it to the actuator. Make sure the connections are secure and sealed with heat shrink wrap.
-
Next, connect the 10-gauge wire to the other end of the harness. This wire will provide power to the joystick.
-
After connecting the wires, it’s time to install the joystick control for the actuator. The video demonstrates how to install and wire the joystick control. It’s important to follow the instructions carefully, so everything is connected correctly.
-
The video shows how to hook up harnesses and connect the switch to the battery cables. The process is straightforward and only takes a few minutes to complete.
-
Finally, connect the 10-gauge wire from the joystick to the battery. Make sure to connect the wire to the positive terminal of the battery. This will provide power to the joystick.
-
Once everything is connected, turn on the power and test the functionality of the product. The creator tests the functionality of the product and demonstrates its use in the video.
FAQs
Here are some FAQs that might pop up during the installation process:
Q. What is the purpose of the harness?
A. The harness connects the Johnny Bucket’s actuator and the joystick to the mower’s electrical system.
Q. Does the Johnny Products come with an instruction manual?
A. Yes, the Johnny Products come with a detailed instruction manual. You can also find installation videos on YouTube.
Q. Is it safe to install Johnny Bucket and Johnny Plow by myself?
A. As long as you follow the instructions carefully, it’s safe to install the Johnny Products by yourself. However, if you’re not experienced, it’s recommended to get help from a professional.
Q. Can the Johnny Bucket and Johnny Plow be used with any type of mower?
A. The Johnny Products are designed to work with most riding mowers, but it’s essential to check the compatibility before purchasing.
Q. What are the upcoming products in the Johnny Products line?
A. The video ends with a teaser of upcoming content on installing load doubler bucket, tooth bar, and forks. Stay tuned for more updates on Farpoint Farms!
Conclusion
Wiring up the Electrical and Joystick is the final stage in installing Johnny Bucket and Johnny Plow. It’s essential to follow the instructions carefully to ensure the connections are secure and the product is functional. The Johnny Products are an easy way to turn any riding mower into a tractor, and they can be purchased at johnnyproducts.com. If you have any questions about the installation process, check out the instruction manual or contact a professional. Happy farming!
